Preparing for Bike Storage in the Garage
Measuring and Clearing Wall Space
To start with, measure the space on your carport wall. You really want no less than 1 foot for each bicycle. Also, have an additional foot for each four bicycles. This confirms that you have enough space for everyone. For street bicycles, which have thin handlebars, you want around 11 crawls of room each.2 Next, confirm the space is clear of whatever could delay the bicycles.
Gathering the Necessary Tools and Materials
Then, collect what you'll require for introducing bicycle capacity. Snatch screws, a drill, a level, and approximating tape. Additionally, get the capacity pieces like wall mounts or roof lifts. Getting ready all that in advance will make the arrangement simpler and faster.
Product | Description | Compatibility |
IB-ST4 Bike Wall Mount Hanger | Efficient wall storage solution that saves space and protects bikes. | Most bike frame types |
IB-ST10, IB-ST11, IB-ST18 Floor Stands | Expandable and modular floor bike stands for flexible storage. | Accommodates various bike sizes and weights, including e-bikes |
IB-ST2, IB-ST16, IB-ST21 Utility Stands | Versatile bike storage solutions for different garage layouts and bike types. | Adjustable to fit a range of bike frame styles and sizes |
Mounting the Horizontal Supports
To store your bicycles in the carport, begin by setting up the even backings. They assurance your bicycles wait. The bottom support must be the right height, space must be left for the top support, and the bottom support must be properly attached to the wall studs.
Determining the Ideal Height for the Lower Support
Set the principal bicycle snares 65" (1.65m) off the floor. This permits the bicycles to hang completely without contacting the ground.
Spacing the Upper Support for Staggered Bike Hanging
The upper help must to be set 14" (350mm) over the lower one. This makes a stunned game plan for the bicycles, assuring they don't catch each other.
Securing the Supports to the Wall Studs
Join the backings to the wall studs with 3 1/2" screws. For each stud, use two screws. This technique is powerful enough to hold your bikes simply.
Installing the Bike Hooks or Racks
Begin by putting the bicycle snares or racks on the wall exactly where you need them. Having them at the right distance is critical. These assurances your bicycles stay protected and set up.
Spacing the Hooks for Proper Bike Clearance
Space the bicycle snares 24-26 inches separated on the lower support.2 This distance offers sufficient space for the bicycles. It holds their controls and wrenches back from simply spread each other. Additionally, confirm the upper snares are focused over the lower ones. This makes a slick, staggered look and helps fit more bicycles.
Aligning the Upper and Lower Hooks
Place the base snares 65 inches (1.65m) from the floor. The top snares must to sit 14 inches (350mm) higher. Along these lines, bicycles hang ideally, one over the other. Flat dispersing for the base column is 2 feet (600mm). The top line's snares should to be 1 foot (300mm) side.
Before you mount them, drill 3/8 inch openings for the snares. By screwing the hooks into wall studs, you can secure them without risking breaking the wood.2 Doing this avoids the bicycle stockpiling from wobbling or tipping.
